This unit was purchased new and has only been used two or three times. The company who owns this unit now sub contracts out all of thier drilling as they are not really a drilling company (engineers). The SS125 Kit has been stored inside.
Currently is has a 8" DTH Hammer (King Drill unit with a DHD380 chuck) and a 304mm (12") DTH Bit. The owner was drilling Guard Rail Holes and Fencing Post Holes on a project previously.
Its a very sharp unit.
Standard specifications for the SS125 Drill Attachment are:
- Operating Requirements: >= 30gpm at 2800psi
- Flushing Medium: Air, Water, Grout
- Push/Pullback: 7000lbs (14,000kbs w/dual feed system)
- Air Flushing Volume: >= 375cfm
- Air Flushing Pressure: 150psi
- Thread Type: 2-7/8" IFP -> 3-1/2" API Reg Box
- Max Hole Size: 12" (304mm)
- Rotary RPM: 30 - 50rpm @ 17-27 gpm
- Maximum Drill Depth: 100 ft (30m)
- Length: 12 -15ft (3.6m - 4.5m)
- Rotation Torque: 4000ft/lb @ 2800psi
- Weight: 3,500lbs
- Feed/Rotation Flow Relief Valve w/quick Connect Pressure Unload Valve, Hydraulic Quick Connects Required: Supply, Return, Case Drain
2 Side Drilling Accessibility
110 Degrees of Movement from Horizontal to Vertical
Variety of Feed Lengths Available
Interchangeable Drill Head options
Utilises Hydraulic Auxilary of the Skid Steer or Carrier Unit
Manual Hydraulic Proportional Controls
Optional Radio Remote Control Available
The price is also yet to be confirmed.