• CG-L10 Progressive Cavity Grout Pump

    The ChemGrout model CG3L10 are skid mounted grout pumps.  These units feature a 851 Litre holding hopper and a size 10, flanged inlet, progressing cavity grout pump. 

    Suction hoses are available upon request. 

    The holding hopper is connected directly to the suction of the pump for a continuous pumping operation.  The grout pump is a positive displacement, rotor/stator pump with 2 speed hydraulic motor to run the pump at 150 LPM or 300 LPM, pressure to 300 psi (20 bar). 

    CG-L10 Progressive Cavity Grout Pump

    • Civil Engineering – soil nails, tiebacks, earth anchors, high pressure rock grouting

      Structural – building restoration, foundation stabilization, foundation raising, soil compaction grouting

      Construction – post tensioning, slab undersealing, slab jacking and slab raising

      Marine – underwater foundations, piers, breakers, shoreline foundations

      Mining – high pressure rock grouting, tunnel lining, contact grouting, waterproofing, cable and rock bolts

      Utilities – encasements, waterproofing, dam foundations

      Geotechnical – deep well casing, monitor wells, well sealing and abandonment

    Your Drilling Equipment


    Opening Hours


     Monday - Friday:

    8:00am - 4:00pm

    Saturday: Closed

    Sunday: Closed

          For urgent inquiries outside

    of normal working hours

    please contact:

    Lance: 021 998 762 or

    Glenn: 021 855 963 or

    Christina: 021 619 366


    Drill Connex Ltd -

    Auckland Office & Warehouse

    69 Creek Street



    New Zealand 

    Phone: 021 998 762 - Lance

    Email: lance@drillconnex.co.nz 

    Phone: 021 619 366 - Christina (Chris)

    Email:  chris@drillconnex.co.nz 


    Drill Connex Ltd - Katikati

    Level 2, Building 2

    Talisman Centre

    15 Talisman Drive


    New Zealand 

    Phone: 021 855 963 - Glenn



    © 2020 Drill Connex Ltd - All Rights Reserved