Pressurised Fluid Density Balance Kit

Pressurised fluid balance to accurately measure the absolute density of a fluid sample is measured by using the Halliburton Tru-Wate pressurised fluid density scale.

The operation is similar to the conventional mud balance, with the additional capability of placing the sample in the cup under pressure.
Drilling fluids and foam cements often have a considerable amount of air entrained or trapped within the fluid that may give erroneous results when determining fluid density using conventional equipment.

This air volume may be decreased to a negligible quantity by pressurizing the sample cup, which will then give more accurate density
readings of the fluid itself.
The standard scale density may be read directly in units of: lbs/gal
lbs/ft3 specific gravity PSI/1000 ft

Pressurised Fluid Density Balance Kit

    Your Drilling Equipment

    Supplier

    Opening Hours

     

     Monday - Friday:

    8:00am - 4:00pm

    Saturday: Closed

    Sunday: Closed

          For urgent inquiries outside

    of normal working hours

    please contact:

    Lance: 021 998 762 or

    Glenn: 021 855 963 or

    Christina: 021 619 366

     

    Drill Connex Ltd -

    Auckland Office & Warehouse

    69 Creek Street

    Drury

    Auckland

    New Zealand 

    Phone: 021 998 762 - Lance

    Email: lance@drillconnex.co.nz 

    Phone: 021 619 366 - Christina (Chris)

    Email:  chris@drillconnex.co.nz 

     

    Drill Connex Ltd - Katikati

    Level 2, Building 2

    Talisman Centre

    15 Talisman Drive

    Katikati

    New Zealand 

    Phone: 021 855 963 - Glenn

    Email:glenn@drillconnex.co.nz 

     

    © 2020 Drill Connex Ltd - All Rights Reserved