KLEMM Drilling attachment systems of the KA series are very easy to adapt to existing excavators as the carrier devices because all interfaces (mechanical, electrical and hydraulic) are available and prepared for use.
The excavator mounted Drilling Attachment allows for many solutions, especially for difficult drilling positions. The long reach and 360 degree ability of the excavator not to mention the ability to reach over, above and below itself offers drilling in almost all locations.
 
Specifications:
Length: 5,500mm
Travel Length: 4,450mm
Feed Force: 60kN
Retractive Force: 60kN
Feed Speed: 7m / min
Fast feed Speed: 36m / min
Electrical: 24v system
Magazine: No
 
Carrier Requirements:
Excavator Weight: 28 ton or larger
Hyd. Vol Flow min: 140 / 280 (l/min)
Hyd. Pressure max: 270 bar
Working Pressure: 220 / 270 bar
KA162 Weight without excavator connection: With one roll-over, approx 4.30 ton
KA162 Weight without excavator connection: With two roll-over, approx 4.85 ton
 
Uses:
Anchoring for Retaining Walls
Anchoring into Rock, Block or Concrete Walls
Dewatering Holes in Walls / Depressurisation
Soil Nails
Floor Drilling in Opencast Mines
 
Recommended Rotary Heads:
KD1011
KD1215R
 
https://b0873272-92a3-454c-95d4-6b42960d2b19.usrfiles.com/ugd/b08732_7e8648c2f83349b4857388dcfca249e0.pdf