The Resemin Cable R66 Rig is the perfect solution for Mechanised installation of Cable Bolts in medium sized sections from 4m x 4m and up to a height of 7m.
The Cable R66 Rig includes an arm equipped with a long hole feed for 4, 5, and 6 ft rods, in addition a second arm with a cable pusher mechanism and hose to perform the injection of cement/grout.
 
Maximum drilling length up to 25m, hole diameters up to 64 mm, or reamed to 127mm.
 
Other features are:
Strong chassis for heavy duty applications,
Articulated 4WD,
Self propelled with diesel engine,
Electro hydraulic for drilling. 
Montabert HC50 drifter which has the lowest operating cost of its kind in the market.
 
Basic Technical Specifications:
Hydraulic Drifter: Montabert HC95, 24kW, 180bar, 57Hz (3420bpm), 955Nm Torque, 0-220rpm 
Hole Diameters: 51mm - 89mm
Air Consumption, flushing: 8000 l/sec (7 - 10 bar)
Shank: R38, T38, T45 - male
Drifter Weight: 181kg 
 
Feed: RE8000 series, rod length 1,219mm, total length 2,826mm
Feed: RE8000 series, rod length 1,524mm, total length 3,126mm
Feed: RE8000 series, rod length 1,829mm, total length 3,426mm
Feed Extension: 715mm
Digital Inclinometer: AMLH System
Rod Length: 1.2m, 1.5m or 1.8m options
Rod Magazine: T38 / 14 + 1 rods or T45 / 12 + 1 rods
Carrier: Model C77
Diesel Engine: CAT C4.4 ACERT, Tier 3
Exhaust Catalyser: Standard
Transmission: Hydrodynamics
Emergency & Parking Brakes: SAHR 
Powershift Gearbox: Dana, T20000
Steering: articulated carrier =/- 40 degrees
Tyres: 12 x R20
Electric Motor: 75kW (100hp), voltage 380 - 1000 VAC (options), 50 - 60 Hz
Electric Cable: 3 x 4/0 - AWG (95mm), 65m length
Degree of Protection: IP 55
Water & Air System: Electric Compressor GA30, 9 bar, Grundfoss pump CR 5 - 9, 115 l/min @ 3500rpm
Weight: 21,170kg
 
For a full list of the Cable R66 Rig Technical Specifications view the PDF Document on the previous page....