• CG-570 Thick Mix Series

    The ChemGrout CG-570 Thick Mix Series includes both skid and trailer mounted grout plants. This machine will continuously mix and pump the widest range of grouting materials from thin to thick consistencies. Materials that are used with this unit include Repair Mortars, Gel Mortars, Stucco, Fireproofing Plastering, EIFS, cement/masonry sand, cement/fly ash, flowable and non-flowable grouts and Bentonite waterproofing grouts.

    The optional air compressor allows the operator to continuously mix, pump and spray.

    The 170 Litre mixing tank is equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valves are large slide gates that allow the thickest materials to fall easily into the pump hopper.

    The holding hopper has an auger in it to keep the material thoroughly mixed while constantly supplying the grout pump with material for the continuous pumping operation.

    The grout pump is a Size 6, 3 stage, variable speed, positive displacement, progressive cavity, rotor-stator pump that delivers up to 30 LPM, 580 PSI.

    These units can be powered by compressed air or their own hydraulic power systems that feature 15 HP Electric motor, 20 HP Gasoline engine or 20 HP Diesel engine, both equipped with electric start.

    The rugged steel frame stands up to the toughest conditions on the job site.

    Operator controls are centrally located for efficient production.

    All components are easily accessible for operating, cleaning, and maintenance.

    The highway ready trailer comes complete with leaf springs, lights, a working platform and an adjustable trailer hitch for either ball or pintle.

    CG-570 Thick Mix Series Grout Plants

    • Anchoring rock bolts, repair mortar spraying, undersealing, slab raising, underlayments, spraying bonded overlays, bridge rehab, dowel bars, and manhole sealing.

    Your Drilling Equipment


    Opening Hours


     Monday - Friday:

    8:00am - 4:00pm

    Saturday: Closed

    Sunday: Closed

          For urgent inquiries outside

    of normal working hours

    please contact:

    Lance: 021 998 762 or

    Glenn: 021 855 963 or

    Christina: 021 619 366


    Drill Connex Ltd -

    Auckland Office & Warehouse

    69 Creek Street



    New Zealand 

    Phone: 021 998 762 - Lance

    Email: lance@drillconnex.co.nz 

    Phone: 021 619 366 - Christina (Chris)

    Email:  chris@drillconnex.co.nz 


    Drill Connex Ltd - Katikati

    Level 2, Building 2

    Talisman Centre

    15 Talisman Drive


    New Zealand 

    Phone: 021 855 963 - Glenn



    © 2020 Drill Connex Ltd - All Rights Reserved