The Resemin, MUKI FF Face Drilling Rig is an electrohydralic front face drilling rig of 1.05m width for recommend sections of 1.2m width x 2.0m high to sections of 3.5m x 3.5m.
The MUKI FF can also be used for scaling.
Other applications for the MUKI FF are the "Cut & Fill" Mining method.
The MUKI FF comes with a square section hydraulic boom and advance feed with multiple options: 
     Telescopic Feed 6-10 ft and 8-10 ft.
     Another option is a Feed for 8 ft rods, equipped with a Montabert HC55 Drifter with 15kW!
 
The Chassis frame is heavy duty, articulated and with 4WD, self propelled with diesel engine and Poclain hydrostatic transmission, electrohydraulic system for drilling.
 
Basic Technical Specifications:
Hydraulic Drifter: Montabert HC55, 15kW, 160 - 200bar, 77 - 95 Hz, 486Nm Torque
Hole Diameters: 32mm - 64mm
Shank: R32 Female
Drifter Weight: 116kg 
 
Feed: RE2500, Telescopic 6' - 10' Rods (1.8m -3.0m), feed extension 600mm
Feed Optional: Telescopic 8' - 10' Rods (2.4m - 3.0m) or Feed 8' for Boom 2.1
 
Carrier: Model C22.1
Diesel Engine: Deutz BF4L2011, Tier 1, 55kW @2300rpm
Transmission: Hydrostatic
Service Brakes: Hydrostatic
Emergency & Parking Brakes: SAHR
Electrical System: 24 VDC
Automatic Fire Suppression: ANSUL, 2 nozzles plus a 2kg Fire Extinguisher 
Parker Hydraulics, Rexroth Pumps
Water & Air System: Compressor LE3-10UV, 10.8cfm, 3 bar, Grundfoss pump, 115 l/min &3500rpm
 
Electric Motor: 55kW (75hp)
Voltage: 380 - 1000VAC
Frequency: 50 - 60Hz 
 
Coverage: 20.38m2 
 
For a full list of the MUKI FF Technical Specifications view the PDF Document on the previous page....