The Resemin, Troidon 44 Face Drilling Rig has a simple but effective design with a 1.3m width recommended for narrow sections with a minimum of 2.5m x 2.5m or up to 4.5m x 4.5m.
The Troidon 44 is equipped with a Montabert 21kW Hydraulic Drifter model HC95. This drifter includes the back hammering function to prevent drill rods from becoming bogged.
 
The Chassis frame is heavy duty, articulated and with 4WD, self propelled with diesel engine.
 
Basic Technical Specifications:
Hydraulic Drifter: Montabert HC95, 21kW, 180 - 200bar, 62 Hz, 764Nm Torque
Hole Diameters: 45mm - 76mm
Shank: R38, T38, T45 - male
Drifter Weight: 186kg 
 
Feed: RE2500, Telescopic 8' - 12' Rods (2.4m -3.7m), feed extension 840mm
Feed Optional: Telescopic 8' - 14' Rods (2.4m - 4.3m) or Advance 12' or 14'
 
Carrier: Model C44.5
Diesel Engine: CAT C4.4 ACERT, Tier 3, 106kW @2200rpm
Transmission: Hydrostatic
Service Brakes: Hydrostatic
Emergency & Parking Brakes: SAHR
Electrical System: 24 VDC
Automatic Fire Suppression: ANSUL, 4 nozzles plus a 9kg Fire Extinguisher 
Boom: Model 4AP.1, Boom Extension 1.2m, Rotation 360 degree, Lift Angle +46 / -25 degrees
Water & Air System: Compressor CTN3, 1.65m3/min, 8 bar, Grundfoss pump, 115 l/min & 3500rpm
 
Electric Motor: 75kW (100hp)
Voltage: 380 - 440VAC
Frequency: 50 - 60Hz 
 
Coverage: 27.8m2 
 
For a full list of the Troidon 44 Technical Specifications view the PDF Document on the previous page....