The Resemin, Troidon 55 Face Drilling Rig is prepared for Tunnel advancement works in Underground Mining and Civil Projects. The Troidon 55 Face Drill offers a 1.85m wide body for medium-sized sections with a minimum of 3.5m x 3.5m or up to 6.5m x 6.5m.
The Troidon 55 is equipped with a Montabert 21kW Hydraulic Drifter model HC95. This drifter includes the back hammering function to prevent drill rods from becoming bogged.
 
The Chassis frame is heavy duty, articulated and with 4WD, self propelled with diesel engine.
 
Basic Technical Specifications:
Hydraulic Drifter: Montabert HC95, 21kW, 180-200bar, 62 Hz (3700bpm), 764Nm Torque, 0-296rpm 
Hole Diameters: 45mm - 76mm
Shank: R38, T38, T45 - male
Drifter Weight: 186kg 
 
Feed: RE2500, Telescopic 8' - 14' Rods (2.4m -4.3m), feed extension 1290mm
Feed Optional: Telescopic 10' - 16' Rods (3.0m - 4.9m) or Advance 14' or 16'
 
Carrier: Model C66.3
Diesel Engine: CAT C4.4 ACERT, Tier 3, 106kW @2200rpm
Transmission: Hydrodynamics
Service Brakes: Wet discs
Emergency & Parking Brakes: SAHR
Electrical System: 24 VDC
Automatic Fire Suppression: ANSUL, 4 nozzles plus a 9kg Fire Extinguisher 
Boom: Model 5AP.4, Boom Extension 1.2m, Rotation 360 degree, Lift Angle +60 / -27 degrees
Water & Air System: Compressor CTN3, 1.65m3/min, 8 bar, Grundfoss pump, 115 l/min & 3500rpm
 
Electric Motor: 75kW (100hp)
Voltage: 380 - 440VAC
Frequency: 50 - 60Hz 
 
Coverage: 40.8m2 
 
For a full list of the Troidon 55 Technical Specifications view the PDF Document on the previous page....