top of page

HC110 Hydraulic Drifter

  • High input/output efficiency ratio, for reduced and optimized energy consumption
  • Easy maintenance with long intervals and Monty service kits available
  • Single body drifter prevents seizing and breakage issues
  • High-frequency rotation engines designed for high speed drilling
  • New generation of hydraulic thrust increases penetration speed, extends the life of shanks, rods and bits
  • Optional hydraulic reverse percussion for long hole drilling applications
  • Easy adaptation on carrier
  • Large hydraulic hoses setup and configurations

HC 110 Drifter, 24-32kW

  • Weight and dimensions

    Weight 215 kg
    Overall length without shank 1,093 mm
    Overall length with shank 1,210 mm
    Overall width 333 mm
    Height 200.5 mm
    Height above shank axis 107.5 mm

    Impact rating

    Maximum output 24–32 kW
    Percussion flow range (max) 150–170 l/min
    Percussion pressure range (max) 165–190 bar
    Maximum impact frequency 3,800–4,300 bpm
    Maximum impact energy 250–380 J

    Rotation specs

      80 cc 100 cc 160 cc
    Maximum rotation speed (RPM) 291 269 175
    Oil flow (l/min) 65 75 78
    Maximum pressure (bar) 210 210 210
    Maximum torque (Nm) 670 840 1340

    Flushing flow and pressure

    Water flushing 130 l/min
    Front end lubricating air consumption at 3bar 250–300 l/min
    • Shank adapters
    • Overhaul kits
bottom of page