The Resemin RAPTOR 44-2R is an electrohydraulic rig for long hole drilling, its hydraulic boom has automatic parallelism, equipped with two rotary actuators allow drilling very close to both walls of the section of the mine which not only reduces dilution but also facilitates the drilling of parallel holes with good visibility for the operator from the cabin.
Its barycentre system for automatic synchronization of the drilling and rotation axes facilitates the drilling of radial and parallel shots with shorter positioning times. High stability with a maximum drilling length up to 35 m, diameters up to 102 mm (reaming 127mm).
It is equipped with the latest technology: 14+1 / 12+1 bar magazine and AMLH System.
Equipped with Montabert HC 95 hydraulic drifter (24 kW) and the Back Hammering rod extractor, the most modern on the market. Includes a rod magazine and hydraulic clamp.
The chassis is heavy duty, articulated 4WD, self-propelled with a diesel engine, Poclain hydrostatic transmission, electrohydraulic system for drilling.
Applications:- Sub Level Benching - Block caving- VCR and cable bolting applications
Basic Technical Specifications:
- Hydraulic Drifter: Montabert HC95, 24kW, 180-200bar, 57 Hz (3400bpm), 955Nm Torque, 0-236rpm
- Hole Diameters: 51mm - 102mm (reaming to 127mm)
- Shank: R38, T38, T45, T51 - male
- Drifter Weight: 181kg
- Feed: RE8000, feed extension 712mm, Rod length 1.219mm, total length 2,833mm or
- Feed: RE8000, feed extension 712mm, Rod length 1,524mm, total length 3,126mm
- Magazine: T38 / 14 + 1 rods
- Magazine: T45 / 12 +1 rods
- Carrier: Model C44.7.1
- Diesel Engine: CAT C4.4 ACERT, Tier 3, 106kW @ 2200rpm
- Exhaust Catalyser: DCO (Diesel Oxidization Catalyst)
- Transmission: Hydrostatic
- Emergency & Parking Brakes: SAHR
- Steering: articulated carrier =/- 40 degrees
- Tyres: 10.00 x R15
- Electric Motor: 75kW (100hp), voltage 380 - 440, (Options 550, 690, 1000) VAC, 50 - 60 Hz
- Electric Transformer: 3.5kVA
- Electric Cable: 3 x 2 - AWG (90m)
- Degree of Protection: IP 55
- Water & Air System: Compressor LE3 - 10 UV, 3 bar, 10.8cfm, Grundfoss pump, 5.1 l/min @ 1800rpm
- Angle Alignment: AMLH electronic aid for long hole drilling (measurement of rotation and feed parallelism, Rod/s quantity display, Electronic carousel control.
- Weight: 13,110kg
For a full list of the Raptor 44-2R Technical Specifications view the PDF Document on the previous page....
