Used Doyle 300 Pile Driver, only slightly used for Demos Only. Has only 10 hours of Demo Use on the clock. Made in the USA.
Note: The images above are examples only.
The design of the RAMBO 300 is primarily suited to transmitting directly downward impact energy from the prime mover {skidsteer loader} through to the pile, by way of the hydraulic hammer and anvil, coupled with downpressure from a hydraulic ram.
The design of the RAMBO 300 will allow the driving of a variety of piles from round to square. 
 
Specifications:
Transport Length: 3400mm
Transport Width: 1400mm
Transport Height: 1700mm
Transport Footprint: 2000mm x 1300mm
Operating Weight: 1400kg
Maximum Post Length: 4600mm
Hammer Weight: 150kg
Number of Impacts: 1000/minute
Oil Pressure: 190 bar (2755psi)
Oil Volume: 80 lpm
Hydraulic Couplers: 2 - 3/4" Flat face Quick Couplers
Hydraulic Control Console: Hammer Positioning Functions, Forward Backward Shift, Side to Side Shift, Forward & Backward Tilt, Side to Side Tilt, Raise Lower Hammer
Level Indicators: 2 Inclinometers
 
For more info Contact Glenn at Drill Connex on 021 855 963