The Resemin Cable Bolter R44 Rig is the perfect solution for mechanised installation of Cable Bolts in medium size sections from 3m x 3m.
The Cable R44 Rig includes an arm equipped with a long hole feed for 4 ft rods (1.2m), in addition a second arm with a cable pusher mechanism and hose to perform the injection of cement/grout.
 
The maximum drilling length is up to 22m with hole diameters up to 64mm, or reamed to 127mm.
 
Other features are:
Strong chassis for heavy duty applications,
Articulated 4WD,
Self propelled with diesel engine,
Electro hydraulic for drilling. 
Montabert HC50 drifter which has the lowest operating cost of its kind in the market.
 
Basic Technical Specifications:
Hydraulic Drifter: Montabert HC50, 12kW, 130bar, 56Hz (3360bpm), 466Nm Torque, 0-237rpm 
Hole Diameters: 33mm - 64mm
Air Consumption, flushing: 83.3 l/sec (7 bar)
Shank: T38 - male
Drifter Weight: 104kg (HC50)
 
Feed: RE8000 series
Feed Extension: 400mm
Digital Inclinometer: AMLH System
Rod Length: 1.2m (4')
Rod Magazine: T38 / 14 + 1 rods
Carrier: Model C44.4
Diesel Engine: CAT C4.4 ACERT, Tier 3
Exhaust Catalyser: Standard
Transmission: Hydrostatic
Emergency & Parking Brakes: SAHR 
Steering: articulated carrier =/- 38 degrees
Tyres: 8.25 x R15
Electric Motor: 75kW (100hp), voltage 380 - 1000 VAC (options), 50 - 60 Hz
Electric Cable: 3 x 4/0 - AWG (95mm), 65m length
Degree of Protection: IP 55
Water & Air System: Electric Compressor CT6B.23, 8 bar, Grundfoss pump CR 5 - 9, 115 l/min @ 3500rpm
Weight: 11,800kg
 
For a full list of the Cable R44 Rig Technical Specifications view the PDF Document on the previous page....