Roof bolter for small sections
Ther MUKI Bolter is suitable for Roof Bolting and Mechanised Meshing installations used to reinforce roof structures in underground mines. The MUKI Bolter is ideal for sections of 2.7m x 2.7m and up to 5m in height.
 
Equipped with the Bolting Turret model T99 which offers two Montabert Drifters, 1 x HC50 for Drilling and 1 x HC28 for Bolting and a magazine of bolts. The Muki Bolter can install Split Sets, Rebar with resin or cement, Swellex, Hydrabolt and Python.
 
Other features are:
Strong chassis for heavy duty applications,
Articulated 4WD,
Self-propelled with diesel engine and electrohydraulic system for drilling.
 
Basic Technical Specifications:
Hydraulic Drifter: Montabert HC50, 14kW, 110 - 130bar, 62.5Hz (3750bpm), 385Nm Torque, 0-193rpm 
Bolting Drifter: Montabert HC28, 9.5kW, R32 female, 103kg
Hole Diameters: 33mm - 45mm
Air Consumption, flushing: 7m3/min (8-10 bar)
Shank: R32 - female
Drifter Weight: 104kg (HC50)
 
Bolting Turret: T99, 6 bolts with 20cm plate, feed extension 250mm, Rod length 1,829mm, total Turret length 2,660mm or
Bolting Turret: T99, 6 bolts with 20cm plate, feed extension 250mm, Rod length 2,134mm, total Turret length 2,960mm
Carrier: Model C22.1
Diesel Engine: Deutz BF4L914, Tier 2, 72.4kW @ 2300rpm
Exhaust Catalyser: DCO (Diesel Oxidization Catalyst)
Transmission: Hydrostatic
Emergency & Parking Brakes: SAHR 
Steering: articulated carrier =/- 35 degrees
Tyres: 10.00 x R15
Boom: Boom 11, 360 degree rotation, extension 700mm
Electric Motor: 55kW (75hp), voltage 380 - 1000 VAC, 50 - 60 Hz
Electric Cable: 3 x 2 - AWG (60m)
Degree of Protection: IP 55
Water & Air System: Compressor LE7-10UV, 10 bar, Grundfoss pump CR 5 - 9, 115 l/min @ 3500rpm
Weight: 10,400kg
 
For a full list of the MUKI Bolter Technical Specifications view the PDF Document on the previous page....